Products tagged with: electronic components
19in front plate adapter install set CCI
This plain, ready-to-install front plate adapter made of anodised aluminium permits the front plate (order no. 19 84 21-XX) with a mounted C-Control I installation set (with and without user module) to be installed in 19"/3 rack unit (RU) mounting racks.
433 MHz 2-channel radio rec. 230 V unit
With only one 8-channel transmitter up to 8 receivers can be telecommanded. The receiver reacts to up to 6 transmitters. Through the transmitter's learn-in mode, indefinite numbers of receivers can work side-by-side without being accidentally set off. The microprocessor controlled receiver based on the Keeloq® Code-Hopping security principle and is trimmed to be extremely secure, which prevents the unauthorised access from other 433 MHz transmitters.Functions: In timed, momentary and switching modes (mixed operation) the delay duration of relay can be set to approx. 0.5, 2.5 and 12.5 minutes. If the transmitter key is pressed before the time is up, then the set time is repeated from the beginning (retriggerable). Can be used as an outdoor light timer, stairwell or fan controller (delayed shut-off relay). The mixed control, that means that relay 1 functions as time switching mode and relay 2 button/switch mode and is applied frequently in the installation technology for example: in the combination as staircase light - timer and door opener Roller blind und blind operation (also door control) is possible with just one key which has the "UP-stop-DOWN" function and those allows up to 8 separate motors to be telecommanded by only one remote control. Through the numerous available modes this device finds many applications, for example: in alarm systems, surveillance equipment, and electronic installation and in office settings or electronic facilities.
433MHz 2-channel radio receiver 12V unit
These 2-channel receivers can be used as remote controlled timers and buttons/switches or as roller blind and awning controllers. With only one 8-channel transmitter up to 8 receivers can be telecommanded. The receiver reacts to up to 6 transmitters. Through the transmitter's learn-in mode, indefinite numbers of receivers can work side-by-side without being accidentally set off. The microprocessor controlled receiver based on the Keeloq® Code-Hopping security principle and is trimmed to be extremely secure, which prevents the unauthorised access from other 433 MHz transmitters.Functions: In timed, momentary and switching modes (mixed operation) the delay duration of relay can be set to approx. 0.5, 2.5 and 12.5 minutes. If the transmitter key is pressed before the time is up, then the set time is repeated from the beginning (retriggerable). Can be used as an outdoor light timer, stairwell or fan controller (delayed shut-off relay). The mixed control, that means that relay 1 functions as time switching mode and relay 2 button/switch mode and is applied frequently in the installation technology for example: in the combination as staircase light - timer and door opener Roller blind und awning operation (also door control) is possible with just one key which has the "UP-stop-DOWN" function and those allows up to 8 separate motors to be telecommanded by only one remote control. Through the numerous available modes this device finds many applications, for example: in alarm systems, surveillance equipment, and electronic installation and in office settings or electronic facilities.
787-712 DC24V / 2,5 A DIN rail-POWER SUP
Primary clocked DC supply for assembly at TS35-DIN rail.
Analogue switch timer w/o power reserve
Analogue time switch clock with 24 h switch wheel and clock display with particularly flat design. Simplest programming by pulling the switch slider, whereby the shortest switching time amounts to 15 min. Inclusive of ON/OFF mode switch.
Beginner's box MFD-KIT-USB
The MFD saver package for a quick entry into full graphics display The set includes: MFD-Titan (consisting of MFD-80 B, MFD-CP8-ME, MFD-R16): display and operating and control unit with full graphical backlit display and freely programmable illuminated function keys and user-definable status LEDs(red + green) · 4 high-speed counter · Optional inputs about 3 kHz · 4 frequency counter inputs optionally about 3 kHz · 2 incremental counter approximately 3 kHz · Real time clock/ year time switch Software easy SOFT-PRO: Programming, Parameter and documentation software easy SOFT PRO on CD. Installation environment WIN98, WIN NT 4.0 Service Pack 6, Windows 2000, Windows ME, Windows XP Includes documentation, manual covering MFD-Titan and all EASY control relays. connection cable easy 800 PC USB CAB: For connection at the programming interface of the MFD titan 2 m long, for connection to the PC interface with interface electronics for MFD-Titan.
BLDC CONTROLLER/DRIVER 20A 48V
Unit of control and output for three-phase BLDC motors Detection of position via external incremental Encoder (ABN) Programming via Trinamic Motion Control Language (TMCL) Operation in Host and Standalone mode (analogue or TMCL) Interface: RS232, RS485, CAN, clock/direction (S/D). 4 programmable inputs (analogue/digital) 2 programmable digital outputs (up to 50 V/2 A) Cooling is not necessary Over-current & over-temperature-protection Connection via pluggable screw-connector strip Aluminium casingWith the optionally available USB-X V2 interface transducer BN: 198813 signals can be converted from USB to CAN, RS485, IIC, LIN and SPI.
BLOCK PEL 230/12-2 HUTSCH. ADAPTER
The primary clocked PEL power supply for DIN-rail mounting is ideal for small distributions. The stage-profile casing fits optimally in these sub-distributions.
BLOCK PEL 230/24-1, 3 HUTSCH. ADAPTER
The primary clocked PEL power supply for DIN-rail mounting is ideal for small distributions. The stage-profile casing fits optimally in these sub-distributions.
BLOCK PEL 230/24-2, 5 HUTSCH. ADAPTER
The primary clocked PEL power supply for DIN-rail mounting is ideal for small distributions. The stage-profile casing fits optimally in these sub-distributions.
BUSH, 12-PIN,FRONT PLATE MOUNT,
Line connectors to the Front mounting plate with Single hole mounting.
BUSH, 8-PIN,FRONT PLATE MOUNT,
Line connectors to the Front mounting plate with Single hole mounting.
C-CONTROL II UNIT NV
The Main Unit II is capable of replacing almost all circuit boards from instrumentation and control technology, which previously required special integrated circuits to be constructed. The principle item of the Main Unit II is a compound-filled 16-bit microprocessor made by the German high-tech company Infineon. Among other applications, this controller is also used in the German automobile industry. Compared to the C-Control I version, the Main Unit II offers considerably more hardware resources, for instance almost 100 times more storage in total and 5 times faster processor clock frequency . Whenever you want to capture measurements, sample switch settings or count impulses.The Main Unit II has still more: You can update or expand the operating system of the Main Unit II with the Hardware Design including FLASH memory. Considerable advantages are offered here by the new virtual machine in the operating system of the controller, and the specially developed C2 programming language - among other things the support of multi-threading. Because events are processed in parallel in multi-threading, the processing on the control computer is no longer suspended if data transfer is delayed. Waiting is carried out in the background, while the control computer performs other actions. In contrast to C-Control I, the Main Unit II also allows 32 bit Integer and 64 bit floating point processing. After programming, your Main Unit II will run as a stand alone device. The PC is not necessary for normal operation, it can however remain connected to the unit if required for the purposes of data capture.
C-Control PRO Unit Mega 128
The C-Control Pro-System is based on RISC-microcontrollers of AVR-family of Atmel, which is characterized by low power consumption. These efficient microcontrollers have proved themselves in the meanwhile in huge quantities in numerous applications. The Unit Mega 32 consists of an 8 bit RISC processor unit (Reduced Instruction Set Computer) with flash memory, EEPROM, S-RAM, digital ports, timer/counter, comparator, PWM/DAC channels and serial interface. The type Mega 128 offers besides these system components more storage capacity and a large number of input-/output interfaces. Most of the131commands of the AVR-Controller are executed with a stroke. Therefore these building blocks reach an extraordinarily high processing speed. The microcontroller-chips are together with other important system components in a compact DIL-component (40- or 64-pin case) and so form the CC-Pro-module. For clock generation there is a frequency generator in module with a frequency of14.7456 MHz.In the module there is also a C/Basic-Byte-Code-Interpreter preinstalled, which converts the programming languages in machine language. The program for the respective application can therefore be written on a PC either in the programming language "C" or "Basic".
C-CONTROL PRO UNIT MEGA 32
The C-Control Pro-System is based on RISC micro-controllers of the AVR-family by Atmel, which are characterized by a low power consumption. These powerful micro-controllers have meanwhile been tried and tested in large numbers in numerous applications. The Unit Mega 32 consists of an 8 bit RISC processor unit (Reduced Instruction Set Computer) with flash memory, EEPROM, S-RAM, digital ports, timer/counter, comparator, PWM/DAC channels and serial interface. The model Mega 128 offers along with these system components more storage capacity and a large number of input/output interfaces. Most of the 131 commands of the AVR controller are processed with a pulse. For this reason these components achieve an extraordinarily high processing speed. The micro-controller chips are present together with other important system components in a compact DIL-component (40 or 64-pin casing) and thus make up the CC-Pro module. A quartz generator is present in the module with a frequency of 14.7456 MHz for clock generation.A C/Basic-Byte-Code-Interpreter is also pre-installed in the module, which takes care of converting the higher programming languages in the machine language. The programme for the respective application can, therefore, be written on a PC in the programming languages "C" or "Basic".